Welcome to the ,Turner Syndrome Awareness Card Auction! This is a collaborative Card Auction for the benefit of the Turner Syndrome Foundation, which operates solely on donations. With Covid the last couple of years have been very difficult for the Turner Syndrome Foundation since most of their big fundraisers are held as "in-person" events and the pandemic has put all of that on hold. The TS Foundation provides support, guidance and educational programs for families impacted by Turner Syndrome. TS is a genetic disorder where a female is born missing part or all of her second X chromosome leaving her with lifelong medical issues and learning disabilities.

The very talented Card Designers who have donated their amazing cards are from all over the world and work on Design Teams for various crafting companies that sell dies, stamps and other card making supplies. They are the most generous and caring people I know! They have poured lots of love into each of their creations!

If you see a card that you love, please bid with your heart! Thank you So Much for your participation! Click on this link to visit ,Turner Syndrome Awareness Card Auction!,,

Thank you,

Lori K.

P.S. If you would like to learn more about TS, please visit the Turner Syndrome Foundation: ,https://turnersyndromefoundation.org/

Suggested card size - 5"x7"

MATERIALS LIST: COPIC® MARKERS:

#3490J Sweetheart Candy Digi Set B60, B63

Hammermill® 100lb. White Coverstock G12, G14

Candy paper from my stash N0, N1, N2

Ballerina Pink 12"x12" Cardstock RV00, RV02, RV23

Scrap of Hot Pink from my stash V00, V01, V04

Be Mine® Die W1

Heart Lace® Stitched Oval Die Y00, Y02, Y13

G-Studio® Pink Pigment Ink Pad YR00, YR01, YR02

Tear-ific® Tape

Foam Tape

To start I sized the candy jar image to

2-1/2"x5" and placed on one half the page.

Copy and paste to other side of page.

I sized the individual candies to 1/2" and

placed randomly around the jar base. I placed a second set of 1/2" candies on the

other side of the page. I sized a third set of candies to 7/8" on the other side of the page.

I cut the page in half to color. Color as desired, I used Copic® Markers. The Colors are listed above.

I stayed with pastel colors. I used some blues and grays to add highlights to the jar.

I cut out the bottom portion of the image

with an X-acto® knife to enable placing the

Lace Stitched Oval® Die under the image

as shown. I secured the die with washi-tape to allow to color within the oval as shown.

Once the coloring is complete, run the image and die through the Big Shot® to cut out the main image.

Fussy cut the candies from the second half

of page and the bow from the second candy jar.

Cut the Ballerina Pink card stock to 5"x12".

Score and fold at 7" and at 10" to form an

easel card base.

Cut the Candy paper to 5"x2", and 5"x5".

Score and fold the 5"x5" in the middle.

Smudge the edges of the Ballerina Pink card base and the candied paper edges.

Using Tear-ific® Tape, adhere the folded candy paper to the top Ballerina Pink flap with 1-1/2" of the flap sandwiched between the candy flaps as shown.

Using Tear-ific® Tape adhere the 5"x2" rectangle to the bottom of the interior of the bottom as shown.

Using Tear-ific® Tape apply to the backside of the

Heart Lace® Stitched Oval image on the bottom

half. Adhere to the front lower portion of the

front flap.

Using Foam Tape adhere the small fussy cut candies over the candies around the jar base.

(I used small candies on the base and decided they were too small, so I removed them.)

Using Foam Tape adhere the 7/8"-1" fussy cut in a row and one on the lower left edge as shown.

Using Dimensional® Glue adhere the "Be Mine"

sentiment on the oval main image. A sweet

confection card for your sweetie!

So glad you came along on this sweet journey! Stay tuned- I have new Digi Sets and more free tutorials coming soon. I also have almost 100 free tutorials in various formats on my ,Tutorials Page if you are looking for something to craft a special card for a special someone!

Hugs,

P.S. Join Us and share your inspiring creations with us at ,Jan's Blog Challenge where anything goes with a "twist". Every month a NEW challenge on the first Monday of each month. Two Winners every month! One winner is randomly selected from all entries, one by the JDS Design Team - and one from entries using JDS Digi Sets!

I am sharing this card with the following:

,****Pammie's Inky Pinkies**** **********Challenges********** (pammiesinkypinkieschallenges.blogspot.com)

,CD Sunday Plus Challenge (cdsundaychallenge.blogspot.com)

,Lil Patch of Crafty Friends Challenge ...

,613 Avenue Create (avenue613.blogspot.com)

,Stamping Sensations (sirstampalotchallenge.blogspot.com)

,Dreaming of Scrap (sognandoscrap.blogspot.com)

,Let's Craft and Create (letscreatechallenges.blogspot.com)

,River of Creativity

,Pattie's Creations Design Challenge (pattiescreationschallenge.blogspot.com)

Suggested card size: 5"x7"

MATERIALS LIST COPIC® MARKERS

,3490J Sweetheart Candy Digi Set G00, G12

Hammermill® 100 lb. White Coverstock RV00, (Custom - RV00/RV02)

3 - Recollections® 4-1/2" White Doilies V01, V12

Tear-ific® Tape Y02, Y06, Y08

Dimensional® Glue YR00, YR01

To start, arrange the candy the way you prefer that fits within a 4-5/8"x6-5/8" rectangle on the right side of the page. Size the group of hearts to 4-5/8"x6-5/8" with two hearts aligned along the left of the rectangle to make the fold. Copy and mirror reverse on a second page in order to make the card interior. Delete the rectangle before printing.

Color as desired - I use Copic® Markers. The colors used are listed above. Color both pages the same.

Using a score board, score and fold along the hearts

so that the hearts align on the score and fold.

Fussy cut, leaving the two (2) fold/scores attached to form the cardbase.

After fussy cutting out the cardbase, open and edge the edges of the hearts using the outer inch of the doilies.

Repeat the fussy cut with the inner insert. I cut the two sections apart at the score/fold.

Adhere the candy hearts to the inside flap to cover where I had glued the doilies.

I also aligned and adhered back-to-back for

support.

OPTIONAL: I had printed a few small candy hearts

and adhered to the back along with my name plate.

Your Sweetheart Candy Doily Card is complete- ready for that special friend or sweetheart! It fits nicely in a 5"x7" envelope. Thanks for joining me today on another of my card crafting journeys.

It means so much that you have taken the time to share a part of your days with me.

Hugs,

P.S. Have you entered the January Challenge at Jan's Digi Stamp Shop Challenge Blog? Anything goes (with a twist), up to five entries allowed, and it's free to enter. Win a prize with your creation! Hope to see you there.

I am sharing today's creation with the following challenges:

Crafty Sentiments Designs

Through The Craft Room Door (ttcrd.blogspot.com)

Shopping Our Stash Weekly Challenge Blog

****Pammie's Inky Pinkies**** **********Challenges********** (pammiesinkypinkieschallenges.blogspot.com)

Coloring in Scrapland (colouringinscrapland.blogspot.com)

Crafts Galore Encore Challenge Blog (cardsgalorechallenges.blogspot.com)

Suggested card size: 6"x6"

MATERIALS LIST FOR Baby It's Cold Outside: Copic® Markers:

,#3475J Baby It's Cold Outside Digi Set C0, C1, C3

Hammermill® 100 lb. White Coverstock E50, E51

Red Solid Core Card Stock G12, G14, G16, G19

Winter Berry® Pad Cardinals N2, N4, N5, N6

Green Cardstock (2-3 shades of green) R12, R14, R17, R29

Liquid Pearls® Rouge Y00, Y13, Y15

Branch Punch (2-3 shades of green) YG03, YG05

1/4" Offray® Red Ribbon

Nesting Circle® Dies

Tear-ific® Tape

Dimensional® Glue

Foam Tape

Sweater Swatch

91% Alcohol

Size the penguin couple image to 3-1/4"x2-1/4" on half page. Select a sentiment size 2-1/4"x3/4" if desired. Print on Hammermill® 100 lb. White Coverstock.

Color as desired, I used Copic® Markers for this effect I am about to share with you.

The colors I used are listed above. Color the knit items as shown. (Only the knit items at first).

Using 91% Alcohol, moisten the sweater swatch.

(Not wet, damp... If wet the ink will leach out). Cover the image with the swatch, cover with palm of your hand and press. Count to 10.

The knit pattern should show on the knit items. Finish coloring the image as desired. You can also shadow the the knits once these items are dry.

Once fully colored- using the 4-1/4" circle die-

center around the image and run through your Big Shot®.

Using a branch punch or die, cut multiple

pieces in varying shades of green as shown.

Using Dimensional® Glue adhere the branch pieces one at a time along the edge of the circle; one overlapping the other until you have formed a

wreath.

Using Liquid Pearls® Rouge apply small droplets randomly around in the greenery of the wreath as berries.

.

Cut a 12"x6" rectangle of red solid core; score and fold at 6" for your Cardbase.

Cut a 5-3/4"x5-3/4" square of the

Winter Berry® Pad Cardinals.

Smudge the edges of the cardinals using VersaMagic® Hint of Pesto.

Center and adhere the cardinals to the red Cardbase with the fold on the left.

Center and adhere the wreath on the cardinals as shown.

Tie the ribbon into a bow. Using Dimensional® Glue adhere the bow into the wreath on the lower right.

OPTIONAL: Using some of the scraps...

Cut a 2-1/4"x4-3/4" green rectangle, a 2"x4-1/2" cardinals rectangle and a 1"x4-3/4" piece of gold.

I like to decorate the back of my cards too!

I hope you enjoyed this hot cocoa fueled ,Baby It's Cold Outside, card making journey- I certainly did! I hope by now everyone has downloaded ,Ornaments 2021 Free Digi Set as it will will be "retired" on Christmas Day! Have a Joyous Holiday Season and Happy Crafting!

Hugs,

PS - We are mid-way on our December Challenge at ,Jan's Digi Stamps Challenges., Anything goes, free to enter, badges prizes given! Looking forward to seeing you there!

I am sharing with the following:

stamps & fun = CREATIVITY (stampsfun-creativity.blogspot.com)

Use Your Stuff

4-Season Swap Challenge Blog (4-seasonchallenge.blogspot.com)

Crafting Happiness Challenges

International Art & Soul (intaas.blogspot.com)

CD Sunday Plus Challenge: CD Sunday Plus - Challenge #75 - hosted by Carol - Anything Goes (as long as Rule 3 has been observed). (cdsundaychallenge.blogspot.com)

613 Avenue Create (avenue613.blogspot.com)

Lil Patch of Crafty Friends Challenge ...

This is a 5"x7" card

MATERIALS LIST

,Peppermint Mice #3350J Stamp Set

Hammermill® 100lb. White Coverstock

Photo Play® - Not Even a Mouse Cardstock

5"x7" Cardbase

Sandylion® Essentials - Candy Stickers

Paper Studio® Candy Canes

Iridescent Sequins

Sandpaper

Vintage® Torn Edge Nesting Oval Dies

Nuvo® Crystal Drops - Simply White

Make-up Sponge

Inguild® Bolme - OldRoad

1/8" Green Satin Ribbon

1/2" Lace

Twinkling Clouds® Flocking

Dimensional® Glue

Tear-ific®Tape

Size the Sugar jar mouse 3-3/4"x3-1/4" and select a sentiment and place under the image. Print on Hammermill® 100lb. White Coverstock centered on half the page. Color as desired (I use Copic® Markers). Using the largest Vintage® Torn Edge Nesting Oval Die center as desired over the Sugar jar mouse and run through the Big Shot®. Using Inguild® Bolme - OldRoad smudge the edges of the Oval. Cut a 5"x7" rectangle of Photo Play - Not Even a Mouse® Cardstock and edge using Nuvo® Crystal Drops - Simply White and the Make-up Sponge. Let Dry. Adhere the Oval sugar jar mouse centered on the 5"x7" rectangle of Photo Play - Not Even a Mouse® Cardstock. Cut a 6" piece of lace and weave the 1/8" green satin ribbon through it and adhere across the bottom as shown. Wrap the raw edges to the back and secure. Adhere to the 5"x7" Cardbase with fold on left. Tie a small ribbon bow and adhere. Sand the candy canes flat on one side. Adhere randomly the Sandylion® Essentials - Candy Stickers, the candy canes and Iridescent Sequins as shown. Using Dimensional® Glue adhere Twinkling Clouds® Flocking to the fur on the mouse's Santa Hat. Let Dry. OPTIONAL: Apply a few scrap rectangles in a design on the backside with a name badge.

Remember Spice drops, candy canes, and chocolatey treats make for sweet dreams-and Peppermint Mice to play while the magic of Christmas prevail! Thank you for stopping by and sharing a part of your day with me. I hope you have a Blessed Holiday!

Hugs,

P.S. Don't forget to stop by and enter your craft creation at ,Jan's Digi Stamps Challenge Blog. Anything goes, Prizes and Lots of Card Inspiration! Stop by the shop and get your Ornaments 2021- FREE! | Jans Digi Stamp Shop (janmahew.com) It will be retired on Dec. 26th!

I am sharing with the following:

Crafty Catz (craftycatzweeklychallenge.blogspot.com)

Polkadoodles Craft Challenge

The House That Stamps Built – Amazing things can happen with a few rubber stamps & some ink!

Fab 'n' Funky Challenges (fabnfunkychallenges.blogspot.com)

Penny's Paper-Crafty Challenge Blog (pennyschallenges.blogspot.com)

InLinkz - Linkups & Link Parties for Bloggers

ABC Christmas Challenge

CREATIVE INSPIRATIONS (cinspirations.blogspot.com)

The Paper Funday Challenges

The Male Room (themaleroomchallengeblog.blogspot.com)

This is a 5"x7" card

MATERIAL LIST

,#3500J Ornaments 2021-FREE! Digi Set

Hammermill® 100 lb. White Coverstock

5"x7" Cardbase

Color as desired (I use Copic® Markers)

DCWV® Foiled Cardstock - Green

DCWV® Foiled Cardstock - Gold

DCWV® Foiled Cardstock - Silver

Red Glitter Cardstock

Music Cardstock

Black Solid Core Cardstock

Sizzix® Merry & Bright Dies

Nuvo® Embellishment Mousse - Platinum

VersaMagic® Jumbo Java

Small Brush

Quickie Glue Pen

Gold Dust Glitter

Sequin Gold Glitter

Fire Engine Red Glitter

Foam Tape

Rubber Cement

Size the Ornaments 3"x5", Color as desired, I used Copic Markers. Set to the side. This is a set that lends itself to a modern look, a CAS look or even have a nostalgic touch. This card has plenty of glitz yet a touch of nostalgia. I cut a 5"x7" Red Glitter cardstock for front base.

Cut a piece of music 4"x6" and distressed adhered to the red Glitter at an angle with a couple of scrap foil rectangles sticking out from underneath. Fussy Cut the image. Using the Quickie Glue pen to do the fine designs. Adhere to the music using Foam Tape. Cut the sentiment twice- once in Black and once in Silver mirrored foil cardstock. Adhere! Finished! Quick and simple!

Perfect for a little bit of Glitter, Glitz, and Glam for the Holidays! Don't forget to get your FREE Instant Digital Download of ,Ornaments 2021 FREE! This Digi Set is available 'til Christmas-then it will "retire." Thanks again for stopping by...

Hugs and Happy Holidays,

P.S. - Join us for our new December blog challenge at ,Jan's Digi Stamps Challenge Blog., Anything goes, free to enter, and prizes given! Looking forward to seeing you there!

I am sharing with the following:

Through The Craft Room Door (ttcrd.blogspot.com)

Passion for Markers (promarkerchallenge.blogspot.com)

Lemon Shortbread Challenge Blog

The Holly and Ivy Christmas Challenge

Christmas Kickstart Challenge

****Pammie's Inky Pinkies**** **********Challenges********** (pammiesinkypinkieschallenges.blogspot.com)

InspirationStation (inspirationstationchallenge.blogspot.com)

This is a 5"x7" Card

MATERIALS LIST COPIC® MARKERS

,#3300J Christmas Cardinals Digi Set B60, B63

Hammermill® 100lb. White Coverstock E42, E43, E44, E47

Color as Desired- I use Copic® Markers G28

Recollections® Christmas * Noel Paper Pad R12, R14, R17, R29, R39

My Colors® Parrot Cardstock Y02, Y21

Kraft® Paper YG61, YG63, YG67

Gold Heat Transfer Foil YR21, YR23, YR24, YR27

Nuvo® Crystal Drops - Simply White

Starfire Glitter

Glitter Kiss® Sahara Gold Kiss

Small Snowflake Sequins

Nuvo® Glitter Drops - White Blizzard

Tear-ific® Tape

Dimensional® Glue

Make-up Sponge

Size the Jingle Bells 3"x5" and print. Color as desired, I used Copic® Markers. Colors listed above. Fussy cut. Apply Nuvo® Glitter Drops - White Blizzard on the snow. Let Dry. Laser print Jingle Bells on Kraft Paper. Cover the print with foil, and cover both with Parchment paper and run through a Minc® or apply Iron.

Cut Recollections® Christmas* Noel Paper Pad - Green Square 4-1/2"x6-3/8". Apply Nuvo® Crystal Drops - Simply White with a make-up sponge around the edges and lightly sprinkle with Starfire Glitter. Let Dry. Cut My Colors® Parrot Cardstock 5"x7" and adhere to the front of the 5"x7" cardbase. Adhere the Recollections® Christmas * Noel Paper Pad - Green Square 1/4" from the top and both sides on the My Colors® Parrot Green. Adhere the Jingle Bells to the Green Square about 3/4" from the top and 1" from each side. Trim the Kraft® Paper Sentiment to 7/8"x5" and edge with Glitter Kiss® Sahara Gold Kiss. Adhere across the bottom of the card front 1/4" from the bottom. Randomly adhere small snowflake sequins and white sequins. That completes your Christmas Jingle Bells Card!

I hope you have enjoyed this short tutorial for my Christmas Jingle Bells Card. Thank you for sharing a part of your day with me and hope to see you again soon. We are continuing the Jan's Digi Stamps Challenges (jansdigistampschallenges.blogspot.com) ANYTHING GOES challenge each month! I invite you to stop by and share your creations with us. Use a Jan's Digi stamp and have a second chance to WIN! Hope to see you there.

Hugs,

P.S. Don't forget to stop by the shop and download Ornaments 2021-FREE! This digi set is my holiday gift for YOU!

I am sharing with the following:

Creatalicious Challenges

Country View Challenges

Simply Magnolia Challenges Blog

InLinkz - Linkups & Link Parties for Bloggers

This is a 5"x7" card.

MATERIALS LIST

,#3320J Holly & Boo Digi Set

Hammermill® 100 Lb. White Coverstock

Color as desired (I use Copic® Markers)

5"x7" Cardbase

American Crafts® Deck the Halls Pad

DCWV® Copper Luxe Foil Cardstock

Green Cardstock Scraps (Various Shades)

IO Dies®- DIE215-E

Sizzix® Foliage Punch

Paws-itivity® Die - Branch

Darice® Embossing Essentials Die - Pine Branch

Iridescent Sequins

Tear-ific® Tape

Dimensional® Glue

Size the Holy Sprig to 3"x2-1/2" and print. Color as desired, I use Copic® Markers. Fussy cut.

Cut the American Crafts® Deck the Halls Pad Burlap piece to 4"x5-1/4". Cut the Pink Gold Foil Cardstock 4-3/8"x 5-5/8". Adhere the Burlap piece centered on the Pink Gold Foil. Adhere the foil and burlap piece about 3/8" from the bottom and both sides of the 5"x7" cardbase.

Cut (3) Paws-itivity® Die - Branch of Pink Gold Foil Cardstock. Cut a variety of foliage in various shades of green from scraps using the dies listed above. Arrange and adhere in the upper left corner of the Burlap & Foil Rectangle. Top the arrangement with the Holy Sprig as shown. Using dimensional glue randomly adhere a few iridescent sequins. OPTIONAL: I use rectangular scraps and my badge to decorate the back side of the card.

No need for mistletoe to fall in love with this card! Thank you for stopping by and spending a part of your day with me. Best wishes this holiday season to you and yours. Come back and visit for more Card Tutorials coming soon!

Hugs,

PS - Join us for our New December Blog Challenge at Jan's Digi Stamps Challenges. Anything goes, free to enter, and prizes given! Looking forward to seeing you there!

I am sharing with the following:

Through The Craft Room Door (ttcrd.blogspot.com)

Cardz 4 Guyz

Lemon Shortbread Challenge Blog

This is a 5"x7" card

MATERIALS LIST

,,#3355J Holiday Sleigh Digital Stamp Set

Hammermill® 100lb. White Coverstock

Color as desired (I used Copic® Markers)

Paper Studio® - WJB Collection - Plaids

Amy Designs® - Bauble Frame Die Set

Nuvo® Crystal Drops - Bright Gold

VersaMagic® - Wheat

VersaMagic® - Jumbo Java

Gold Metallic Twine

Tear-ific® Tape

Dimensional® Glue

Size the sleigh image to 4-1/2"x3-3/8" and the sentiment 1-1/2"x1-1/4" and group on half the page... Print on Hammermill® 100lb. White Coverstock. Color as desired, I use Copic® Markers.

Center the sleigh and sentiment in the Amy Designs® - Bauble Frame Die Set, run through the Big Shot®. Using VersaMagic® - Wheat around the edges of the inner cut-out, then again using

VersaMagic® - Jumbo Java.

Cut a 5"x7" rectangle of Paper Studio® - WJB Collection - Plaids and adhere to the front of a 5"x7" card base. Center the outer frame of the Die Cut on the card front and adhere. Center and adhere the inner image back in the frame. Fold at the top. Wrap the Gold twine twice around the fold and tie a bow. Apply three dots of Nuvo® Crystal Drops - Bright Gold on the lower left corner and again on the upper left corner as shown. OPTIONAL: Apply a few scrap rectangles in a design on the back of your card with a name badge.

Thanks for stopping by! I hope you enjoyed ,Holiday Sleigh, and have your own sleigh ride planned for this Holiday Season! I still have more Christmas Cards "up my sleeve", so please stop by again soon!

Hugs and Happy Holidays,

P.S. Have you downloaded my Free Holiday Gift to you for 2021? ,,Ornaments 2021-FREE Digi Set. It will be available 'til Christmas Day!

I am sharing with the following challenges:

Allsorts challenge blog

Gem of A Craft Challenge (pinkgemchallengeblog.blogspot.com)

Colour Crazy Craft Challenge (colourcrazychallenge.blogspot.com)

https://creativefingerschallengeblog.blogspot.com/2021/11

Creative Knockouts

Aud Sentiments Challenge Blog

This card is a 4-1/2"x6-1/4" double Z-Fold gate card.

MATERIALS LIST

,#3070J Over the River Digi Stamp Set

Hammermill® 100 lb. White Coverstock

Color as desired (I used Copic® Markers)

DCWV® Very Merry Paper Pad

Double Z-Fold Gate cardbase 4-1/2"x6-1/4"

Nuvo® Crystal Glaze

Nuvo® Glitter Drops- White Blizzard

Nuvo® Crystal Drops- Ivory Seashell

PaperCrafts® Wreath Gemstones

VersaMagic® - Jumbo Java

Small Snowflake Sequins

Rubber Cement

Dimensional® Glue

Size your car image to 2-5/8"x3-1/4" and print. Color as desired, (I use Copic® Markers). Fussy cut. Apply Nuvo® Crystal Glaze to the windshield and car lights. Apply Nuvo® Glitter Drops- White Blizzard to the snow on roof, fenders, hood and bumper. Let Dry. Apply PaperCrafts® Wreath Gemstones over the wreath on front of car.

Using DCWV® Very Merry Paper Pad the House papers, cut (1) 4-1/2"x6-1/4" rectangle, (2)

1-1/2"x4-1/2" panels for the front flaps of the brown house paper. Cut (2) 2-1/4"x6-1/4" panels for the middle of the black house paper. Adhere the panels to the flaps using Rubber Cement.

Trim to the angles. Using VersaMagic® - Jumbo Java edge the brown panels. Apply Nuvo® Glitter Drops- White Blizzard to the roof tops of the houses on the black panels. Let Dry. Randomly adhere small snowflake sequins to the black panels. Apply Nuvo® Crystal Drops- Ivory Seashell at the bottom of the front (2) 1-1/2" panels at the bottom for snow. Let Dry. Adhere the car to the front left panel. Be sure to only apply glue to the Left Back HALF of car.

I hope you are inspired by this nostalgic card and it warms your heart with happy memories of family and home. May you share joyful memories, laughter, and good cheer! Thank you for stopping by and sharing a part of your day with me.

Hugs,

PS - Join us for our new challenges at ,Jan's Digi Stamps Challenge Blog., Anything goes, free to enter, and prizes given! Looking forward to seeing you there!

I am sharing this card with the following:

InLinkz - Linkups & Link Parties for Bloggers

Through The Craft Room Door (ttcrd.blogspot.com)

Crafty Catz (craftycatzweeklychallenge.blogspot.com)

Anything Goes with a Fun Fold for Creative Creases #20 (secretstamper.com)

This is a 5"x7" card

MATERIALS LIST

,3300J Christmas Cardinals Digital Stamp Set

Hammermill® 100lb. White Coverstock

Color as desired (I used Copic® Markers)

Bazzill® - Prince Charming Cardstock

TPC Studio® - Winter Blues Cardstock

Federal Blue Cardstock

5"x7" cardbase

Nuvo® Crystal Drops- Ivory Seashell

VersaMagic® - Ocean Depth

Pearl Mesh

Pearl Flourishes

Elizabeth® Fitted Oval Dies

Sizzix® - Peace on Earth Dies

Dimensional® Glue

Tear-ific® Tape

Size the "Christmas Cardinals Gate" to 4-1/2"x5-1/4" on half page. Print on Hammermill® 100lb. White Coverstock. Color as desired (I use Copic® Markers). Fussy Cut from ground level and up. Using the largest Oval die cut the balance of the image. Place the cardinal's tail and the Bow of the decoration on the backside of the die. Run through the Big Shot®. Using the TPC Studio® - Winter Blues Cardstock and the largest Oval die cut an oval. Align the two (2) ovals and adhere as shown. Cut a 5"x7" rectangle of Bazzill® - Prince Charming Cardstock and adhere to the 5"x7" cardbase. Apply VersaMagic® - Ocean Depth around the edges of the cardbase. Center the Ovals on the cardbase and adhere with the fold on the left.

Cut single strands of Pearl mesh and adhere around the edge of the oval as shown using Dimensional® Glue. Clip pieces of the pearl flourishes that fit in the corners as shown. Apply

Nuvo® Crystal Drops®- Ivory Seashell to the snow as shown. Let Dry. Using Federal Blue Cardstock and Sizzix® - Peace on Earth Dies, run through the Big Shot®. Adhere the sentiment to the card front as shown. OPTIONAL: Apply a few scrap rectangles in a design on the back of your card with a name badge.

I hope this helps you to work through your Christmas Card List! I am getting a bit closer to filling my list each day and enjoying this opportunity to share with you as well. Stop by again soon for some more Holiday Card-Making Inspiration!

Hugs,

P.S. Have you stopped by and entered your card/craft creation in this month's ,Jan's Digi Stamp Shop Challenge Blog? Anything Goes (with a twist), up to 5 entries allowed, and FREE to enter!

I am sharing with the following Challenges:

CD Sunday Plus Challenge (cdsundaychallenge.blogspot.com)

Lil Patch of Crafty Friends Challenge ...

Peace On Earth Christmas

Craftyhazelnut's Christmas Challenge (craftyhazelnutschristmaschallenge.blogspot.com)

Gem of A Craft Challenge (pinkgemchallengeblog.blogspot.com)

Crafter's Castle (crafterscastle.blogspot.com)

Daring Cardmakers

Aud Sentiments Challenge Blog

We Love Stamping

This is a 5"x7" card.

MATERIALS LIST

#3350J Peppermint Mice Digi Set

Hammermill® 100lb. White Coverstock

Color as desired (I use Copic® Markers)

My Mind's Eye®- Be Merry Paper Pad

Pink Cardstock

Alinacutle® Snowflake Oval Stitched Die

VersaMagic® Aquatic Splash

VersaMagic® Oasis Green

Versa Mark®

Sparkle® Embossing Powder

Twinkling Clouds® Flocking

Red & White Baker's Twine

Dimensional Glue®

Tear-ific® Tape

Size the Sugar Jar & Mouse to 3-3/4"x3-1/4" and Sentiment to 3-1/8", center on half page. Print on Hammermill 100lb. White Coverstock. Color as desired, I used Copic Markers. Center the Sugar Jar & Mouse in the Alinacutle® Snowflake Oval Stitched Die and trim around any items that stick out past the oval. Do not remove any of the paper. Pull the edge of the Sugar Jar handles and the ends of the Sentiment to the back side of the die. Run through the Big Shot®. Apply VersaMark® to the Snowflakes around the oval and sprinkle with Sparkle® Embossing Powder. Apply Heat. Using Dimensional Glue® adhere Twinkling Clouds® flocking to the fur of the Mouse's Hat.

Cut the Pink Cardstock to a 5"x7" rectangle and adhere to the front of the 5"x7" cardbase. Cut the My Mind's Eye®- Be Merry Paper Pad- Peppermint to a 4-3/4"x6-3/4", smudge the edges using VersaMagic® Oasis Green and VersaMagic® Aquatic Splash. Adhere the Peppermint rectangle centered in the Pink rectangle on the front. Adhere the Sugar Jar & Mouse image in the center of the card front. Wrap the Red & White Baker's Twine 2 times around the fold and knot. Complete, simple and fresh with the combination of traditional Christmas colors and subtle hues of mint and pink.

I hope you've enjoyed this tutorial- as I have probably mentioned before- I am a Christmas Girl at heart- I'm sure a lot of you are too! Stop by again soon for another Christmas Card Creating Journey. Don't forget to stop by my shop to receive your ,FREE Gift from Jan's Digi Stamps for 2021- it's available until Christmas! Have a Joyous Holiday Season and Happy Crafting!

Hugs,

PS- Ready for a challenge? Be sure to stop by ,Jan's Digi Stamp Challenge Blog. Enter your own creation. It's FREE to enter. Anything goes. Prizes!

I am sharing with the following:

The House That Stamps Built – Amazing things can happen with a few rubber stamps & some ink!

ABC Christmas Challenge

CREATIVE INSPIRATIONS (cinspirations.blogspot.com)

Crafty Sentiments Designs

Passion for Markers (promarkerchallenge.blogspot.com)

Through The Craft Room Door (ttcrd.blogspot.com)

Lemon Shortbread Challenge Blog

The Holly and Ivy Christmas Challenge

****Pammie's Inky Pinkies**** **********Challenges********** (pammiesinkypinkieschallenges.blogspot.com)

Use Your Stuff

The Cutie Pie Challenge Blog

This is a 5"x7" card

MATERIALS LIST

,#3186J Santa's List Digital Stamp Set

Hammermill® 100lb. White Coverstock

Color as desired (I use Copic® Markers)

DaisyD's® Premium Pad

Recollections® Red cardstock

Paper Studio® Textured Cream Sheet Music

Black Solid core cardstock

5"x7" Cardbase

Tonic® Dear Santa Die

Nesting® Notched Rectangle Dies

Distress Ink®- Vintage Photo

Liquid Pearls® Rouge

Iridescent Sequins®

Burlap Swatch

91% Alcohol

Tear-ific® Tape

Dimensional® Glue

Size the Santa sack to 4-1/2"x4-1/2", print on Hammermill® 100lb. White Coverstock. Color as desired, I used Copic® Markers. If using Copic® you may want to color only the bag first and cover with a damp burlap swatch for about 10 seconds. Let Dry! Then color the balance.

Cut the Paper Studio® Textured Cream Sheet Music to 5"x7" and apply Distress® Ink - Vintage Photo to the edges. Adhere to the cardbase front with fold on left. Using the largest Nesting® Notched Rectangle Die position over the Santa's bag cutting off the left side. Run through the Big Shot®. Apply Distress® Ink - Vintage Photo® to the edges. Repeat using the Antique Santa paper of the DaisyD's® Premium Pad and next to largest Nesting® Notched Rectangle Die. Cut rectangles 1/8" larger than each using the Recollections® Red cardstock . Fussy cut the corners to match leaving 1/8" as shown. Pop the green swirl out of the DaisyD's® Premium Pad and cut in half. Adhere the antique Santa in the upper right corner, adhere one half the green swirl to the left and one half to the bottom right as shown. Adhere the Santa Bag in the lower left as shown. Using the black cardstock and Dear Santa Die, run through the Big Shot®. Adhere to the card front about 1/2" from the top and right side. Punch out the December25 (or your choice) out and adhere about 1/2" from the bottom and right side. Randomly adhere a few Iridescent® Sequins. Apply Liquid Pearls® Rouge to the holly berries on the bag. Let Dry! OPTIONAL: Apply a few scrap rectangles in a design on the backside with a name badge.

What FUN! As I continue fulfilling this year's Christmas Card List I'll share my other Holiday Card(s) with you again soon! Don't forget to stop by and join in my Challenge Blog: ,Jan's Digi Stamps Challenges. Anything goes, Prizes and lotsa Fun!

Hugs,

P.S. Have you downloaded this year's Free Holiday Gift? ,,Ornaments 2021-FREE Digi Set,,. It will be available 'til Christmas Day!

I am sharing with the following Challenges:

Allsorts challenge blog

Gem of A Craft Challenge (pinkgemchallengeblog.blogspot.com)

Crafter's Castle (crafterscastle.blogspot.com)

We Love Stamping

Alphabet Challenge Blog

C.R.A.F.T. Challenge (trimmiescraftchallenge.blogspot.com)

This is a 5"x7" card

MATERIALS LIST

,#3460J Silent Night Digi Stamp Set

Hammermill® 100lb. White Coverstock

Color as desired (I used Copic® Markers)

Paper Studio® - Away in the Manger Pad

Black Solid Core Cardstock

Demoshop® Holy Night Metal Die

Gina K® - Glitz Glitter Gel

Rubber Cement

Silhouette® - 1-pc Nativity (Modified)

Size the Manger to 2-1/4"x2-1/8", the star 1-1/8"x2". Print on Hammermill® 100lb. White Coverstock. Color as desired, I used Copic Markers. Fussy cut both images. Size the Silhouette® - 1-pc Nativity to 5"x7", delete the points for the manger. Cut on Black Solid Core Cardstock. Copy and paste the outline. Cut on Paper Studio® - Away in the Manger Pad - Palms & Stars. Copy and paste a 2nd outline, Mirror reverse and align Merge to make cardbase. Cut of Hammermill® 100lb. White Coverstock and fold in half. Adhere the Palms & Stars cut out to the front of the New cardbase with fold on left. Adhere the Black Silhouette on the Palm & Stars. Adhere the Manger between the two silhouette images. Apply Gina K® - Glitz Glitter Gel to the star. Let Dry. Adhere the star over the star at the top. Cut your sentiment Demoshop® Holy Night Metal Die of white. Adhere as shown. Such a Blessed Greeting!

A Special card for this Holiday Season. Stop by again soon- I have more Holiday Card Crafting adventures to share! Don't forget to stop by my shop to receive your ,FREE Thank You Gift from Jan's Digi Stamps for your support. Have a Joyous Holiday Season and Happy Crafting!

Hugs,

PS- Ready for a challenge? Be sure to stop by ,Jan's Digi Stamp Challenge Blog. Enter your own creation. It's FREE to enter. Anything goes. Prizes!

I am wanting to share with the following:

C.R.A.F.T. Challenge (trimmiescraftchallenge.blogspot.com)

Tic Tac Toe Challenge - Inspiring creativity 8-ways each week

Cardz 4 Galz

Through The Purple Haze Challenges

Color Throwdown

InLinkz - Linkups & Link Parties for Bloggers

Crafty Creations Challenges

Suggested card size: 5"x7"

MATERIALS LIST:

,#3475J Baby It's Cold Outside Digi Set COPIC® MARKERS:

Hammermill® 100lb. White Coverstock B00, B02

Blue Snowflake® Cardstock C0, C1, C3

Stitched Oval Snowflake® Frame Die E50, E51, E53, E77

1/4" Blue Satin Offray® Ribbon G12, G14, G16, G17, G19

VersaMagic® Aegean Blue N3, N5, N6, N7

65 each 2mm Baby Blue Rhinestones R12, R14, R17, R29, R39

4 each 10 mm Teal Rhinestones Y02, Y13, Y15

Dimensional® Glue YG03, YG07

Tear-ific® Tape

91% Alcohol Copic® Multiliner 0.5 Black

Xacto® knife

Big Shot®

Sweater Swatch (Cotton is best)

Cut a 5"x7" of the Snowflake cardstock.

Use a 5"x7" Cardbase.

Smudge the edges of the Snowflake® cardstock using VersaMagic® Aegean Blue. Set to the side.

Size the penguin couple image to 3-3/4"x2-1/2" on half page. Sentiment size 1-1/4"x1" and varying sized snowflakes scattered around as shown.

Color as desired, for this effect Copic® Markers. The list is listed above. Color the knit items as shown. (Only the knit items at first)

Using 91% Alcohol, moisten the sweater swatch.

(Not wet, damp... If wet the ink will leach out) Cover the image with the swatch, cover with palm of your hand and press. Count to 10.

The knit pattern should show on the knit items. Finish coloring the image as desired. You can also shadow the the knits once these items are dry.

I decided to draw in an iceberg for them to stand on using a Copic® MultiLiner 0.5 Black.

Colored using B00 & B02 as shown.

Use an Xacto® knife and cut around the hat ball. Center the colored image as desired in the Stitched Oval Snowflake® Frame Die, place the hat ball on the back side and run through your Big Shot®.

Cut (2) 7" pieces of the 1/4" Blue ribbon. Using 1/4" Tear-ific® Tape apply to the back of one of the pieces of ribbon. Adhere to the left of the Cardbase about 1" from the left.

Wrap the raw edges of the ribbon to the back of the Snowflake Cardstock as shown.

Adhere the Snowflake background to the Cardbase using Tear-ific® Tape. Adhere the image to the Snowflake Cardstock to the right of the ribbon as shown.

Using Dimensional® Glue adhere the bow your tied with the 2nd piece of 1/4" Blue Ribbon.

Using Dimensional® Glue I adhered (65) each 2mm Baby Blue Rhinestones on various parts of the Snowflake Oval® Frame.

Adhere (4) each 10mm Teal Rhinestones in the Snowflakes with the larger hole in the center as shown.

OPTIONAL: To reinforce the small parts of the Snowflakes the extend past the card base, I turn the card over and apply a small amount of Dimensional® Glue and let dry.

This helps during mailing.

Wasn't that a FUN card? I hope you enjoyed taking this Holiday Crafting Journey with me. Depending on where you live, I'm sure you can identify with ,Baby It's Cold Outside! Wishing you and yours

A Joyous Holiday Season and Happy Crafting!

Hugs,

PS - Join us for our Monthly Challenge Blog at Jan's Digi Stamps Challenges. Anything goes, FREE to enter, and prizes given! Looking forward to seeing you there!

I am sharing with the following:

Dreaming of Scrap (sognandoscrap.blogspot.com)

CCC Digi Creations

Cardz 4 Guyz

Lemon Shortbread Challenge Blog

The Holly and Ivy Christmas Challenge

This Z-Fold card is 5"x7".

MATERIALS LIST

,#3505J Santa's Gift Digital Stamp Set

Hammermill® 100lb. White Coverstock

Color as Desired (I use Copic® Markers)

American Crafts®-Christmas Lodge Pad

PaperStudio® Remnants of the Season Pad

DCWV® Double Sided Cardstock Pad

Reminisce® Magical Night Cardstock

5"x7" Z-Fold cardbase

White Glitter Paper

Snowflake Sequins

Iridescent Sequins

Nuvo® Glitter Drops- White Blizzard COPIC® MARKERS

Twinkling Clouds® Flocking E50, E51, E53, E04, E30, E34

Merry Christmas® Die N0, N1, N2, N3, N6, N8, N9

StudioG® - Gold Glitter Glue R01, R12, R14, R17, R29, R59

Tear-ific® Tape Y00, Y04, Y08, Y13,

Dimensional® Glue YG61, YG63, YG67, G28

YR20, YR23

Size Santa to 3"x4" on Hammermill® 100lb. White Coverstock. Color as desired, I colored Santa using Copic® Markers. Colors listed above.

Cut a 12"x7" piece of cardstock, score and fold at 3" and again at 7" for your Z-Fold card base.

Fussy cut Santa, set in a coffee filter.

Apply Dimensional® Glue to the white portions of Santa's suit. Adhere Twinkling Cloud® Flocking.

Apply Nuvo® Glitter Drops-White Blizzard to the snow on the tree branches and the snow on Santa's boots. Let Dry.

Apply StudioG® - Gold Glitter Glue to the ornaments on the tree. Let Dry.

Cut your panels for the Z-Fold:

Cut DCWV® Double Sided Cardstock Pad Navy into 3 pieces. 3"x7", 4"x7" & 2-1/2"x7"

Cut American Crafts®-Christmas Lodge Pad green tree paper 3-3/4"x6-3/4"

Cut American Crafts®-Christmas Lodge Pad

Bed Ticking paper 2-3/4"x6-3/4"

Cut Reminisce Magical Night Cardstock to

2-1/4"x6-3/4"

Using Tear-ific® Tape, adhere the bed ticking paper centered on the 3"x7" Navy panel.

Adhere the Green Tree paper centered on the 4"x7" panel.

Adhere the Reminisce® Magical Night Cardstock centered on the 2-1/2"x7" panel as shown.

Adhere the panels to the Z-Fold Cardbase as shown using Tear-ific® Tape.

Green trees on front Flap. Bed ticking behind the front flap.

Magical Night® Stars on the far right of the interior flap.

Cut your sentiment using Merry Christmas®

Die on white Glitter Paper. Run through the

Big Shot®.

Adhere the sentiment 1" from the top using Dimensional® Glue.

Adhere Santa to the Green tree panel about 3/4"-1" from the bottom. the tree will stick past the edge of the flap about 1/8"...

Randomly adhere a few sequin snowflakes

and iridescent sequins.

I like using some of the scraps to decorate the back side of my cards and adhere a badge plate- adds a little more personalization!

Santa has his gifts in hand and is ready for a Merry Christmas delivery! I hope you've enjoyed this tutorial- as I have probably mentioned before- I am a Christmas Girl at heart!

PS- Ready for a challenge? Be sure to stop by ,Jan's Digi Stamp Challenge Blog. Enter your own creation. It's FREE to enter. Anything goes. Prizes!

I am sharing with the following challenges:

Lil Patch of Crafty Friends Challenge ...

Peace On Earth Christmas

Dragonfly Dreams (dragonflydreamschallenges.blogspot.com)

Stamping Sensations (sirstampalotchallenge.blogspot.com)

https://www.welovestamping.co.uk/

Gem of A Craft Challenge (pinkgemchallengeblog.blogspot.com)

Send A Smile 4 Kids Challenge Blog

Crafter's Castle (crafterscastle.blogspot.com)

CARDZ TV

Anything Goes with a Fun Fold for Creative Creases #18 (secretstamper.com)

This is a 5"x7" Bendy Wing Card. Materials used are listed below:

MATERIALS LIST

,#3450J SnowGlobe Family Digi Set

#723J Tree Scene Digi Set (you may have this set in rubber)

Hammermill® 100 lb White Coverstock

Color as desired (I used Copic® Markers)

Blue Glitter Cardstock

White Glitter Cardstock

Nuvo® Glitter Drops- White Blizzard

Chunky White® Embossing Powder

Karen Burniston® Word Set - Let it Snow Die

Crop-a-Dile® Corner Chomper

Tear-ific® Tape

Small Paint Brush

Stamp 3 Trees from Tree Scene on the 5"x7" background, air brush or smudge in the clouds. Print the ,SnowGlobe Family in B&W (or the Color Version). Color as desired, I used Copic® Markers. Fussy cut the family and Extra Child. Fussy Cut the Bendy Wing Parts and cut slits as shown. Using Foam tape adhere the extra Child on top the the child in the group. Add a couple of slopes to the wings for hill effects. Color the Trees and add Nuvo® Glitter Drops-White Blizzard to the snow on the branches. Brush a little of the glitter Drops on the wings. Adhere the wings to each side of the background. Sprinkle lightly with Chunky White® Embossing Powder and heat from underneath. Adhere the SnowGlobe Family to the right wing by the woman only so the left wing will fit in the slit behind the male. Cut the sentiment using the Karen Burniston® Word Set - Let it Snow Die and Glitter Paper. Adhere to the Background as shown. I added a 5"x7" piece of cardstock to the back of the background for aesthetics. Crop-a-Dile® Corner Chomper the upper two corners of the Background.

OK! I hope your SnowGlobe Family Card is ready to make it's lucky recipient Merry this Holiday Season! Thank you for stopping by and sharing a part of your day with me. Stop by again for more Christmas Cards coming soon!

Hugs,

PS - Join us for our November Blog Challenge at ,Jan's Digi Stamps Challenges. Anything goes, free to enter, and prizes given! Looking forward to seeing you there!

I am sharing with the following Challenges:

Aud Sentiments Challenge Blog

Penny's Paper-Crafty Challenge Blog: Penny's Challenge #508 (pennyschallenges.blogspot.com)

ABC Christmas Challenge

Crafty Creations Challenges

Daring Cardmakers

Polkadoodles Craft Challenge

CARDZ TV

Suggested card size: 5"x6-1/2"

MATERIALS LIST:

,#3475J Baby It's Cold Outside Digi Set COPIC® MARKERS:

Hammermill® 100lb. White Coverstock B00, B02, B60, B63, B66

Clear Scraps® Acrylic Sheet BV20

Small Oval Punch C0, C1, C3

E6000® Glue or 3 in 1 Beacon® Glue E50, E51, E53, E77

Medium Pompom G12, G14, G16, G17, G19

White Flocking N3, N5, N6, N7

91% Alcohol R12, R14, R17, R29, R39

Dimensional® Glue Y02, Y13, Y15

Sweater Swatch (Cotton is best) YG03, YG07

Big Shot® Copic® Multiliner 0.5 Black

Lay out an Igloo to 4-1/2" x 6-1/2" on half the page. Size the Penguin couple 4"x3-1/8" on the second half of the page. Print on Hammermill® 100 lb. White Coverstock. Color as desired, I used Copic® markers to enable me to use on of my favorite techniques.

Color the knit items as shown.

(Only the knit items at first).

Using 91% Alcohol, moisten the sweater swatch.

(Not wet, damp... If wet the ink will leach out). Cover the image with the swatch, cover with palm of your hand and press. Count to 10.

The knit pattern should show on the knit items. Finish coloring the image as desired. You can also shadow the the knits once these items are dry.

I decided to add an Iceberg for them to stand on. Once colored, fussy cut the image and set to the side.

I colored the Igloo using shades of blue and shade to

give it some dimension as shown. Fussy cut Igloo.

I Used an oval tag punch for the sentiment.

Adhere the sentiment to the Door/Tunnel.

Using Clear Scraps® Acrylic sheet, cut a

12"x1-1/2" strip as shown. I folded at 6-1/2"

and heated the fold.

With the fold on the left, trim the 5-1/2" side

to 1-1/8" to the fold.

Notch the 6-1/2" side 1-1/4" from the edge and the 5-1/2" side 1-1/8" in from the edge as shown. Peel the protective layer off.

Using E6000® Glue, adhere the Igloo to the 6-1/2" backside 1/2" from the bottom of the acrylic as shown.

Make sure both

notches are clear and Igloo is 1/2" from the bottom of the acrylic.

Using E6000® Glue, adhere the penguin couple to the 5-1/2" strip centered between

the fold and the notch on the bottom of the strip as shown. Let Dry.

Using Dimensional® Glue adhere a medium pompom to the ball of the hat.

Slip a coffee filter behind the penguins. Using

Dimensional® Glue adhere white flocking to the hat

brim as shown.

When dry, slip the two notches together...

The igloo should arch and the card will stand on it's own.

Isn't this a heart warming card perfect for the frosty holiday season?

I hope you enjoyed this heart warming ,Baby It's Cold Outside card making journey- I certainly did! Don't forget to stop by my shop to receive your ,FREE gift from Jan's Digi Stamps for your loyalty and support. Have a Joyous Holiday Season and Happy Crafting!

Hugs,

PS - Join us for our November Blog Challenge at ,Jan's Digi Stamps Challenges., Anything goes, free to enter, and prizes given! Looking forward to seeing you there!

I am sharing with the following Challenges:

Fab 'n' Funky Challenges (fabnfunkychallenges.blogspot.com)

Penny's Paper-Crafty Challenge Blog (pennyschallenges.blogspot.com)

ABC Christmas Challenge

Crafty Creations Challenges

CREATIVE INSPIRATIONS (cinspirations.blogspot.com)

Through The Craft Room Door (ttcrd.blogspot.com)

The Holly and Ivy Christmas Challenge

Suggested card size is: 5"x7"

MATERIALS LIST FOR Ornaments 2021 FREE: Copic® Markers:

,#3465J FREE Ornaments 2021 Digi Set C0, C1, C3

Hammermill® White 100lb. Coverstock G00, G02, G05, G07, G28

Red Solid Core Cardstock R12, R14, R17, R29, R59

Green Solid Core Cardstock W3

Gold Metallic Cardstock YR21, YR23, YR24, YR27

Ornament Stock (from my stash)

Nestable ® Stitched Niched Oval Die

Glitter: Celestial

Gypsy Red

Gold Dust

Iridescent

Glitter Pen: Silver

Gold

Nuvo® Glitter Drops: White Blizzard

VersaMagic®: Pumpkin Spice

Hint of Pesto

Wheat

Momenta® Cutting Templates - Gabaraits de deCoupe

Tear-ific® Tape

Quickie® Glue Pen

Dimensional® Glue

X-Acto® Knife

Layout your image as shown above- print size approximately 4"x5-1/2". Print your image on Hammermill® 100lb. White Coverstock. Color as desired, I used Copic® Markers, the list is above.

Center the largest Nestables® Stitched Niched Oval Die (or die of your choice- approximately 4"x5-1/2"). Optional: I cut the left end of the ribbon with an XActo® knife, slipped it over the backside of the die before I ran it through my Big Shot®.

Apply the glitter(s) to the detailed ornaments with Quickie® Glue Pen one color at a time. Let dry. Cut out your Cardbase from Hammermill® 100lb. White Coverstock- 7"x10" score and fold at 5". Suggested Card Size: 5"x7"

Card Front: Cut out the card parts as follows: Red Solid Core Cardstock (Cut 1) 4-3/4"x6-3/4", Gold Solid Core Cardstock 1"x7" (Cut 2), Green Solid Core Cardstock (Cut 1each) 5"x7" and embellishment "frame" 2-1/4"x4-3/8" and 2-1/8"x4-1/2", Ornament print stock

(Cut 1) 2-1/8"x4-1/4" and (Cut 1) 1-7/8"x4-1/4" .

Use Tear-ific® Tape to assemble card front as shown. Center the Red Rectangle and adhere on the Green 5"x7" rectangle. Adhere the Gold strip across the bottom 1/2" from the bottom. Adhere the Ornament print stock 2-1/8"x4-1/4" to the upper edge of one of the Green 2-1/4"x4-3/8" rectangles about 1/8" showing on three sides. Adhere the rectangle 1/2" from the left edge and at the top as shown. Adhere the Die cut image 5/8" from the top, bottom and right side. Using Using Nuvo® Glitter Drops, randomly place drops on the white background of card front and in lower right hand corner of red card stock (as shown, optional). Let dry.

I like to use many of my scrap pieces to decorate the backside of my cards. This is optional. Use Tear-ific® Tape to assemble card back as shown. Card back: Adhered the Gold Solid Core Cardstock strip 1"x7" about 3/4" from the bottom. Adhere the Solid Red Core Strip 1-1/4"x4", 1/2" from the bottom and 2-1/4" from the left. Center and adhere the Ornament print stock 1-3/4x 4" to the Green Solid Core Cardstock embellishment "frame" 1-7/8"x4-1/4", adhere 3/4" from the left and 1/8" from the top. I then adhere my badge.

That's it- your Ornaments 2021 Card is ready to go!

I hope you enjoyed my short card making tutorial using ,Ornaments 2021 FREE Digital Stamp Set,. Are you inspired you to create this card or a one-of-a-kind Holiday Card of your own? Be sure to get your ,Free Digital Download now my shop. This Free Set is available now until Christmas Day. Happy Crafting and Happy Holidays!

Hugs,

PS - Join us for our New November Blog Challenge at Jan's Digi Stamps Challenges. Anything goes, free to enter, and prizes given! Looking forward to seeing you there!

I am sharing with the following challenges:

Creatalicious Challenges

****Pammie's Inky Pinkies**** **********Challenges********** (pammiesinkypinkieschallenges.blogspot.com)

Home - Simon Monday Challenge Blog (simonsaysstampblog.com)

Here's a cute Holiday Card I just finished using one of my favorite Digi Stamp Sets- ,Santa's List. A little secret- the names on Santa's List are actually my Holiday Card List- Family Members, Friends, and Digi Divas!

This is a Z-fold 4-1/2"x6-1/4" card. Materials used are listed below:

MATERIALS LIST

,# 3186J Santa's List Digi Set

Color as you wish-I used Copic® Markers

Z-fold card base

DCWV® Christmas Cardstock Pad

Wood Grain cardstock

Ms. Sparkle & Co.® Doily

KSCRAFT® Stitched Oval Lace Die

Nuvo® Glitter Drops-Blizzard White

White Flocking

Tear-ific® Tape

Rubber Cement

Dimensional® Glue

Print Santa as a B&W line drawing (or use the Copic® colored image I included in the set). Color your image as desired and cut with KSCRAFT® Stitched Oval Lace Die. Apply flocking to Santa's fur with Dimensional® Glue. Cut your panels for the Z-Fold of cardstock. Add Nuvo® Glitter Drops-Blizzard White to the doily and add to the front Z-fold panel. Adhere Santa to the front panel as shown.

I hope you were inspired by this cute Holiday Card! Thank you for stopping by and sharing a part of your day with me. Remember Santa's got his list and I can verify he's checking it twice! Wishing you and yours a Joyous Holiday Season!

Hugs,

I am sharing with the following Blogs:

Crafty Sentiments Designs

Through The Craft Room Door (ttcrd.blogspot.com)

The Holly and Ivy Christmas Challenge

Christmas Kickstart Challenge

Get Creative Challenges

CD Sunday Plus Challenge (cdsundaychallenge.blogspot.com)

Lil Patch of Crafty Friends Challenge ...

Peace On Earth Christmas